Isnin, 11 Julai 2016

LOGARITHM - Part 2

Base Ten Logarithms

We saw above that base ten logarithms are expressions in which the number being raised to a power is ten. The base ten log of 1000 is three:
log 1000 = 3
103 = 1000
So far, we've worked with expressions that have whole numbers as solutions. Here's one that does not. What is the log of 4?
log 4 = x
log 4 ≈ 0.602
because
10 0.602 ≈ 4

Natural Logarithms

Logarithms with a base of 'e' are called natural logarithms. What is 'e'?
'e' is a very special number approximately equal to 2.718. 'e' is a little bit like pi in that it is the result of an equation and it's a big long number that never ends. For those of you who have had calculus, you might remember that eis special because its derivative is itself. If you want to know more about 'e', check any trigonometry text, such as page 234 of Ruud, W.L. and T.L. Shell. Prelude to Calculus, 2nd ed. 1993. Boston: PWS Publishing Company.
Most scientific calculators have an 'e' button and an 'ln' button, so you don't need to memorize the value of 'e'.


Logarithmic Rules

Just as exponents have some basic rules that make them easier to manipulate, so do logarithms. These rules apply to all logarithms, including base 10 logarithms and natural logarithms. For simplicity's sake, base ten logs are used in most of these rules:
1.   br = a is the equivalent to logb a=r (This is the definition of a logarithm.)
2.   log 0 is undefined.
3.   log 1 = 0
4.   log (P*Q) = log P + log Q
5.   log (P/Q) = log P - log Q
6.   log (Pt) = t *log P
7.   10(log a) = a (in the case of natural logarithms, e(ln a) = a)
8.   log (10r) = r (in the case of natural logarithms, ln er = r)
9.   log (1/a) = -log a
Let's take a closer look at each of these rules:

1. br = a is the equivalent of logb a=r. We've already looked at how this works, but here's another example:
log 14 ≈ 1.146
is the equivalent of
10 1.146 ≈ 14

2. log 0 is undefined. It's not a real number, because you can never get zero by raising anything to the power of anything else. You can never reach zero, you can only approach it using an infinitely large and negative power.

3. log 1 = 0 means that the logarithm of 1 is always zero, no matter what the base of the logarithm is. This is because any number raised to 0 equals 1. Therefore, ln 1 = 0 also.
All the rest of the logarithmic rules are useful for solving complex equations, or equations with unknowns.

4. log (P*Q) = log P + log Q means that if you take the logarithm of two factors, it is the same as taking the logarithm of each factor, and adding them together. For example:
log 6 =
log (2 * 3) =
log 2 + log 3 ≈
0.301 + 0.477 = 0.778
If you were using natural logarithms, it would look like this:
ln 6 =
ln (2 * 3) =
ln 2 + ln 3 ≈
0.693 + 1.099 = 1.792
(Note that the numerical value of the natural logarithm is different from that of the base ten logarithm. That's because, in the second example, 1.792 is the power to which 'e' must be raised to get 6, whereas, in the first example, 0.778 is the power to which 10 must be raised to get 6.)
If you have a variable as one of your factors, it would look like this:
log 2y = log 2 + log y
Let's say log 2y = 36 and solve for y:
log 2y = 36
log 2 + log y = 36
log y = 36 - log 2
log y = 36 - 0.301
log y = 35.699
y = 10 35.699
which is a really big number.

5. log (P/Q) = log P - log Q means that if you take a logarithm of one number divided by another, it is the same as taking each logarithm separately, and then subtracting the logarithm of the denominator from the logarithm of the numerator.
For example:
log (3 / 2) =
log 3 - log 2 ≈
0.477 - 0.301 ≈ 0.176
If you were using natural logarithms, it would look like this:
ln (3 / 2) =
ln 3 - ln 2 ≈
1.099 - 0.693 ≈ 0.406
If you have a variable as one of your factors, it would look like this:
log (y/2) = log y - log 2
Let's say log (y/2) = 36 and solve for y:
log (y/2) = 36
log y - log 2 = 36
log y = 36 + log 2
log y = 36 + 0.301
log y = 36.301
y = 10 36.301
which is an even bigger number.

6. log (Pt) = t * log P means that the logarithm of a number raised to some power, it is the same as multiplying the logarithm of that number by the value of the power. 
For example:
log (32) = 2 * log 3 
2 * 0.477 = 0.954
It looks the same when you use natural logarithms, however, as in example three the numerical value will be different.
ln (32) = 2 * ln 3
2 * 1.099 = 2.198

7. 10(log a) = a (or, in the case of natural logarithms, e(ln a) = a). Logarithms and exponents reverse each other.
For example:
10(log 3) = 3
10(log 8) = 8
e(ln 3) = 3
e(ln 8) = 8
If you raise a number to the power of a logarithm that has that number as its base, it is equal to the number that you used in the logarithm.
8. log (10r) = r (in the case of natural logarithms, ln er = r)Because logarithms and exponents reverse each other, this rule is similar to rule number seven.
For example:
log (102) = 2
log (103) = 3
ln (e2) = 2
ln (e4) = 4
Any logarithm of its base number raised to some exponent is equal to that exponent.

9. log (1/a) = -log a means that the logarithm of 1 divided by some number is equal to the negative logarithm of that number. (This is the exactly the opposite of the rule governing exponents where a number raised to a negative number is equal to 1 divided by that number raised to that power.)
For example:
log (1/2) = - log 2 = -0.301 
log (1/3) = - log 3 = -0.477 
ln (1/2) = -ln 2 = -0.693
ln (1/3) = -ln 3 = -1.099

Tiada ulasan:

Catat Ulasan